dimension of welded and seamless steel pipe table

Comprehending the variations between welded and seamless steel pipes can be puzzling. Knowing the different types of steel pipes, the attributes they possess, and what sizing is accessible is essential for picking the right pipe to get the job done.

All steel pipes used in construction and other applications can be grouped into two categories, welded and seamless. Although both have advantages and disadvantages, they can also be procured in a range of sizes.

Rolled steel sheets come together to form welded pipes, a fast production process which does not demand additional material or extra welding. The making of these pipes is, however, limited by the size of the pipe that can be made, with its dimensions typically more constrained than those of seamless ones.

Steel rods are heated to create seamless pipes, which are then molded into the necessary shape and size. Although this process is more expensive and time-consuming than welding pipes, its results offer superior dimension compatibility. From small pipe sections for plumbing and drainage systems to industrial-size pipes, seamless steel has its place in virtually every type of project.

Millimetres (mm) and inches (in) are used to depict the dimensions of welded and seamless steel pipes. An external diameter is the length from one end to the other, a wall thickness is the distance between two sides, and an internal diameter is the width between two sides of the pipe. These measurements can be found in a table form with precise readings.

Selecting the right steel pipe for a job requires necessary considerations regarding its size. A welded pipe can have an external diameter ranging anywhere from 12.7mm to 1829mm and a wall thickness from 1.65mm to 9.53mm – with an internal diameter between 15.8mm and 1560.5mm. Seamless pipes naturally share similar parameters, but must still be scrutinized carefully before deciding which option is best for the assignment at hand.

Fluctuating between 0.5 and 20 inches in external diameter, seamless pipes can have a maximum wall thickness of 0.25 inches or 6.35 mm and simultaneously have an internal diameter anywhere between 0.322 and 16 inches, 8.18 and 406.4 millimeters respectively.

When choosing steel pipe materials and dimensions, it’s crucial to consider the type of steel being used and the intended purpose of the pipe. Every manufacturer has slightly different specifications for their products, so consulting with a professional is key to determine which option perfectly suits the application.

Overall, it is vital to grasp the dissimilarities between seamless and welded steel pipes and be cognizant of their benefits and drawbacks. It is also essential to know the varied dimensions attainable for each variety of pipe, as the precise selection is imperative for the successful completion of any task. Accordingly, understanding the discrepancies between welded and seamless steel pipes is essential for making an informed choice.

A Detailed Guide to Steel Pipe Dimensions and Specifications

When constructing pipelines, welded and seamless steel pipes are the two most frequently used materials. The variations between the two make it important to comprehend each one in order to decide what is most suitable for your project. This write-up will provide a brief overview of the varying measurements and details regarding welded and seamless steel pipes.

Plates and strips of steel are joined by welding processes to fabricate seamless welded steel pipes. An effective way of creating sturdy tubes, this approach is especially beneficial for constructing robust pipes of greater diameters. Depending on their intended function or application, these welded steel pipes may compose of low carbon steel, stainless steel, aluminium or blended alloys.

To assess the size of a welded steel pipe, two parameters are used: outer diameter and wall thickness. The outer diameter depicts the distance across the pipe, expressed in inches, while the wall thickness is measured in millimeters and designates the size of its exterior circumference versus its inner circumference. This latter may vary depending on the application from 0.5mm to 7mm.

From medium-carbon steel or other materials such as stainless steel, aluminum, or alloys, seamless steel pipes are produced by drawing a solid piece of metal through a die. This is ideal for pipes with uniform wall thicknesses and is typically used for pipes of smaller diameter.

When it comes to seamless steel pipes, the shape and size are determined by two factors: outer diameter and wall thickness. The former is evaluated in millimeters while the latter calls for measurements in inches, varying in size from a quarter of an inch to a full six. It mainly depends on its purpose of use.

With the morphology of welded and seamless steel pipes fresh in mind, let’s peek at their respective specs.

Sculpted from steel, welded pipes adhere to comprehensive specifications as determined by standards such as ASTM A53, API 5L, ASTM A252, EN 10217-1, and EN 10217-2. These directives dictate the dimensions, materials, and required strength of the welded steel pipes.

Seamless steel pipes are specifically fabricated to fulfill pre-set requirements of ASTM A106, API 5L, ASTM A335, EN 10216-1 and EN 10216-2 regulations. These standards outline the integral measurements, materials, and strength deemed suitable for utilization in seamless steel pipes.

If you are searching for the perfect steel piping for your project, knowledge of welded and seamless steel pipe dimensions and specifications is a must. When it comes to larger diameter requirements, welded steel pipes are the way to go. However, for smaller diameters, seamless steel pipes are the better option. Variety is not an issue; both types of pipes come in a wide range of dimensions and materials, and have been certified to be suitable for your specific task.

When it comes to building pipelines, welded and seamless steel pipes are two of the top contenders. Crafting them in various sizes and from different forms of steel, they both attest to the prescribed standards. By familiarizing yourself with the distinctions between the two, you can confidently make the best choice for your endeavor.


Post time: 2023-08-21

Related Product

  • Round Seamless Steel Pipe

    Round Seamless Steel Pipe

    Seamless steel pipe is a steel pipe formed by piercing the whole round steel, and there is no weld on the surface, which is called seamless steel pipe. According to the production […]

  • LSAW Steel Pipe(Longitudinally Submerged Arc Welding Tube)

    LSAW Steel Pipe(Longitudinally Submerged Arc Welding Tube)

    Lsaw Steel Pipe(Longitudinally Submerged Arc Welding Tube) JCOE is a pipe making technology for the production of large diameter thick wall steel pipes. It mainly adopts the produc […]

  • Spiral Welded Steel Pipe

    Spiral Welded Steel Pipe

    Spiral welded steel pipe introduction Spiral welded steel pipe refers to the steel pipe with joints on the surface, which is welded after the steel strip or steel plate is bent and […]

  • Hot Dip Galvanized Round Steel Pipe

    Hot Dip Galvanized Round Steel Pipe

    Yuantai Derun Steel Pipe Manufacturing Group produces hot-dip galvanized round steel pipes, which are sold directly by manufacturers, support customization, and have guaranteed qua […]

  • Round Welded Pipe

    Round Welded Pipe

    Since the 1930s, with the rapid development of continuous rolling production of high quality strip steel and the progress of welding and inspection technology, the quality of weld […]

  • UL797 American Standard Certified EMT Threading Pipe EMT Pipe

    UL797 American Standard Certified EMT Threading Pipe EMT Pipe

    OD(outer diameter): 22mm-112mm Thickness: 0.75- 3 mm Place of Origin: Tianjin, China Application: Structural type or fluid transportation Certification:CE,LEED,BV,PHD&EPD,DNV,B […]

  • ERW Round Steel Pipe

    ERW Round Steel Pipe

    Standard:Hollow section:ASTM A500/501,EN10219/10210, JIS G3466,GB/T6728/T3094/3091,CSA G40.20/G40.21 Section Shape: round OD(outer meter): 10.3mm-609mm Application: Structural type […]

  • Pre Galvanized Round Steel Pipe

    Pre Galvanized Round Steel Pipe

    The round pipe with galvanized strip is made of galvanized strip steel, which is generally 0.6MM-2MM. It is processed and formed at one time, with the specification of 15 * 15-100 […]

  • Scaffold Steel Pipe

    Scaffold Steel Pipe

    Introduction to scaffold steel pipe Scaffold steel pipes are generally called scaffold pipes, which is a special term used by people in building or construction. Scaffold steel pip […]