api 5l seamless pipe specification

API 5L is a detailed set of guidelines governing the manufacture of line pipes, specifically those free of any seams or weld-joints. This style of pipe is created through hot working and extruding the steel, resulting in varieties of sizes and wall thicknesses. Seamless pipe is the end result, ushering in a new era of robustness and resilience.

API 5L can safely transport an assortment of items that are typically used for pipeline transportation, such as oil, natural gas, and water, through steel line pipe. This method is particularly appropriate for use in the energy sector, allowing manufacturers to harness its potential for conveyance without any size-related restrictions.

The API 5L pipe can be obtained in plain-end, threaded-end, and belled-end iterations, and each variation is attainable in both black and hot-dipped galvanized finishes. Additionally, welded pipes are also available in various shapes such as square, rectangular, or oval.

Pipe is created to standard lengths, also known as nominal pipe sizes (NPS). Seamless pipe usually has a thin wall compared to welded pipe, which is available in an array of wall thicknesses greater than those found in seamless pipe.

Satisfying the chemical, mechanical, dimensional, and toleration standards, pipe is fabricated through the following stages of production for both seamed and welded pipes.

Pipes begin their lives with the careful selection of raw materials. Subsequently, it is essential to ensure that heating is performed at the precise temperature; this serves as the basis for forming the pipe. Once formed, the pipe must be cooled before proceeding with the heat treating. Rigorous testing then follows to determine its quality, culminating with a final inspection to be certain everything is to code.

A variety of metal alloys, such as carbon steel, alloy steel and stainless steel, are deployed in the production of seamless pipe. Of these, the most commonplace is carbon steel, while alloy and stainless varieties may also be employed.

The breadth of diameters available for seamless pipe production is quite expansive, and includes a variety of wall thicknesses. Some of the most commonly seen measurements are as follows:

• One and a Quarter Inches • One Point Five Inches

Two and a Half Inches

What are the Most Popular Wall Thicknesses?

• One and a Quarter Inches • One and a Half Inches

Nearly three inches of progress.


Post time: 2023-06-28

Related Product

  • GI Circular Steel Pipe

    GI Circular Steel Pipe

    Galvanized round steel pipe Generally, there are two major categories: pre galvanized round steel pipes and hot-dip galvanized round steel pipes. Hot dip galvanized pipe is to make […]

  • LSAW Steel Pipe(Longitudinally Submerged Arc Welding Tube)

    LSAW Steel Pipe(Longitudinally Submerged Arc Welding Tube)

    Lsaw Steel Pipe(Longitudinally Submerged Arc Welding Tube) JCOE is a pipe making technology for the production of large diameter thick wall steel pipes. It mainly adopts the produc […]

  • Spiral Welded Steel Pipe

    Spiral Welded Steel Pipe

    Spiral welded steel pipe introduction Spiral welded steel pipe refers to the steel pipe with joints on the surface, which is welded after the steel strip or steel plate is bent and […]

  • ERW Round Steel Pipe

    ERW Round Steel Pipe

    Standard:Hollow section:ASTM A500/501,EN10219/10210, JIS G3466,GB/T6728/T3094/3091,CSA G40.20/G40.21 Section Shape: round OD(outer meter): 10.3mm-609mm Application: Structural type […]

  • Round Welded Pipe

    Round Welded Pipe

    Since the 1930s, with the rapid development of continuous rolling production of high quality strip steel and the progress of welding and inspection technology, the quality of weld […]

  • Round Seamless Steel Pipe

    Round Seamless Steel Pipe

    Seamless steel pipe is a steel pipe formed by piercing the whole round steel, and there is no weld on the surface, which is called seamless steel pipe. According to the production […]

  • Scaffold Steel Pipe

    Scaffold Steel Pipe

    Introduction to scaffold steel pipe Scaffold steel pipes are generally called scaffold pipes, which is a special term used by people in building or construction. Scaffold steel pip […]

  • UL797 American Standard Certified EMT Threading Pipe EMT Pipe

    UL797 American Standard Certified EMT Threading Pipe EMT Pipe

    OD(outer diameter): 22mm-112mm Thickness: 0.75- 3 mm Place of Origin: Tianjin, China Application: Structural type or fluid transportation Certification:CE,LEED,BV,PHD&EPD,DNV,B […]

  • Pre Galvanized Round Steel Pipe

    Pre Galvanized Round Steel Pipe

    The round pipe with galvanized strip is made of galvanized strip steel, which is generally 0.6MM-2MM. It is processed and formed at one time, with the specification of 15 * 15-100 […]